For bench testing, I typically just hook the audio output line to the mic input on the PC and run AGWPE.
Scott James Ewen wrote: > > > On Tue, Sep 1, 2009 at 9:50 PM, Scott Miller<[email protected] > <mailto:scott%40opentrac.org>> wrote: > > > There's no local packet display at this point - every time I start > > working on that I run into some roadblock, but I forget now what it is. > > I figured as much!, but I thought I might have a chance somewhere... > perhaps I'll just put a digi on the bench, both with dummy loads, and > watch for the digipeat coming back... That way I can have the computer > on the test unit, and still see the results. I ws just lazy today. > > Gotta figure out which inputs actually show up in the telemetry > strings... there's some doubt. Also want to see if I can use the > profile switch as a digital input for telemetry. > > > I could probably expand the tuning/diagnostic thing to show all of the > > ADCs, but right now I'm trying to avoid too many changes to the config > > program so it can be rewritten. > > Yup, knew about the rewrite, so didn't expect much there, but put the > request in the back pocket. It would be nice to get 5 analog and all 8 > bits available as telemetry inputs, but I can make do with what we've > got for now. Just want battery voltage, shack temperature, and AC > power sense for now. > > James > VE6SRV > >
