Maybe. The OT1+ does that with temperature and voltage. I'll take a look at that when I figure out how I want to do the custom telemetry strings.
I'll probably hold off on that until I get some work done on the WS1 weather station. I'm doing some flexible sensor setup that might serve as a good model for the T2 when I get it ironed out. Scott James Ewen wrote: > > > On Wed, Sep 2, 2009 at 4:53 PM, Scott Miller<[email protected] > <mailto:scott%40opentrac.org>> wrote: > > >> I don't believe that there's any way to access the adc values in the > >> script engine, but it would be nice to be able to do that. I'd like to > > > > Not yet, it'll take some testing because reading ADC values introduces a > > bit of a pause while it waits for the conversion to complete. > > Is there room in the RAM to store the ADC values so they don't have to > be read by the script engine? The script engine runs 8 times a second > or so, if I recall... I don't know if you need to sample the ADC > values that often. For some applications, that might be necessary, but > not for mine currently. Once a second would be good for watching the > GPS altitude so that the OT2 can record max altitude, and report that > value once descent has been confirmed. > > >> Sheesh, that sounds like a lot of cases of Coke and Twinkies! > > > > I have a forklift now, so that's OK. I prefer Coke Zero and the Hostess > > chocolate cupcakes. > > Aha, that's what the forklift was for... I thought it was for > offloading containers full of parts! > > James > VE6SRV > >
