On Thu, Sep 24, 2009 at 6:17 PM, pruittn2 <[email protected]> wrote:
> Never mind. I was going through the junk box and found a 12DC 400ma > wall wart. Plugged it in and the leds blinked. Connected to the computer > and all is well. Although the label indicates 7 to 28 volts the 9 volt wall > wart wouldn't do the trick. Sorry for the QRM on the forum I bet if you tried 9 volts with 500 mA, that it would probably work. You have to provide enough power... a lower voltage will require more current than a higher voltage. James VE6SRV
