For a portable mobile installation, what is the normal way to power the T2?
Do I use the regular power in jack and parallel that off the radio 12V feed? I intend to have the radio and tracker in a bag, with a single cable out of the bag to a cig plug and distribution of the 12V out to the Nuvi350 also from the bag. I see the reference to powering the T2 via pin 4 of the serial connector but no similar reference for powering thru the Radio connector...so I assume that isn't an option. (too bad since that would result in only one cable between the T2 and radio with a single connector on each end) Thanks Curt
