OK..I guess I answered my own question. Just found the pinout info on pg 6 of the manual showing the power-in pin on the radio connector. Should have guessed it would have been there since all the rest seems so well thought out.
Looking forward to running this with on-line linked mapping for a 15,000 mile summer road tour. Thanks Curt --- In [email protected], "captc...@..." <captc...@...> wrote: > > For a portable mobile installation, what is the normal way to power the T2? > > Do I use the regular power in jack and parallel that off the radio 12V feed? > > I intend to have the radio and tracker in a bag, with a single cable out of > the bag to a cig plug and distribution of the 12V out to the Nuvi350 also > from the bag. > > I see the reference to powering the T2 via pin 4 of the serial connector but > no similar reference for powering thru the Radio connector...so I assume that > isn't an option. (too bad since that would result in only one cable between > the T2 and radio with a single connector on each end) > > Thanks > > Curt >
