Same here, for some reason I am unable to get it, T2-135, to respond to WIDE1-1, but it will do the opposite & digi all the other wides, that is opposite to what I want, a fill in digi. I have played with cmd hoplimit till I am blue in the face & it appears that the numbers have no correlation to WIDE as we know it. It appears to take WIDE with no numbers as being 1 hop, so HOPLIMIT 1:1 means it will digi on wide alone,BUT if we leave that as 1:0, no hops, & go to 2:1 it still ignores WIDE1-1 & decrements WIDE2-1 to zero, bloody confusing AY. The best I have at present is HOPLIMIT 2:2 with all the others set to :zero. I plan to reload firmware next time I am at digi site to see if that helps. Frankly, if I had known it was going to be this much trouble I would not have bothered with it, the old baycom modem hooked up to a crappy old AT 200 PC using UI-view as a digi worked much better, this was supposed to be an upgrade but is a flop.
73, Murray, ZL1ARL. ----- Original Message ----- From: Mahendra To: [email protected] Sent: Wednesday, May 19, 2010 9:06 PM Subject: {Disarmed} [tracker2] SET UP DIGIPEATER ???HELP PLEASE Hi All I have the OT2M , wanted to setup as digipeater. how to setup for aliases , I did try WIDE1 WITH HOPS 1 WIDE2 HOPS 2 WIDE3 HOPS 3 DIGI ON. Seem to me not digipeated mobile station. Please help...THANKS+
