You could set either port to KISS mode or GARMIN mode. UI-View32 (or
any other KISS application) will show up with whatever callsign+ssid
combination you choose in the program setup, not what you set on the T2.
Scott
John Magda wrote:
>
>
> Looked through the message archives, did not find the complete answer I was
> looking for.
>
> Wondering if anyone has used a splitter cable to operate one port for the
> Nuvi 350 and the other for an igate/UIview32.
>
> I am guessing a null/cross to Com1 for the computer for DTE/DCE and am ok
> with that. But what about the configuration?
>
> Com A set to Garmin or would it be Com B?
>
> What callsign SSID on the OT2, different than the computer SSID?
>
> Thanks for the replies, just thought I would add some excitement to the area
> where I am by adding a mobile IGate for special events etc.
>
> John KB4YFK, FM17
>
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/tracker2/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/tracker2/join
(Yahoo! ID required)
<*> To change settings via email:
[email protected]
[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
