Hi Nic, I did up a drawing for visual people (me) and it is attached. I like schematics most of them time. It doesn't show anything new really, but it does indicate direction of data flow between the hardware. The PC pins are always as indicated when dealing with the 9 pin dsub connectors. Again, this doesn't matter if you using a USB to RS232 or PC Card to RS232 or... Hope this helps! Fred
_____ From: [email protected] [mailto:[email protected]] On Behalf Of ozzienic Sent: Wednesday, June 09, 2010 21:27 To: [email protected] Subject: [tracker2] Can't connect to T2-301 using OTWINCFG Hi all, I recently purchased a T2-301 and it arrived this week. I made a cable that supplies DC to the device negative on pin 4 and positive on pin 5 and connects pin 4 to my USB to serial converter pin 5, pin 2 to my USB to serial converter pin 3 and pin 8 to my USB to serial converter pin 2. Is this correct? I have loaded OTWINCFG onto my laptop and when I run it it doesn't progress past the connect to tracker screen. It doesn't matter if I check the Disable Turbo box or not. Can anybody on the list suggest what I might be doing wrong? Best 73's Nic VK2KXN / VK5ZAT
