I have as well. My solution was after market mounts with a larger thickness in the arch. I'll try to track down the URL where I found them and forward it, but that was some time back and I haven't needed another one since. IIRC, they were only like $15 or so, plus $5 ship.
Randy WF5X On Wed, Jul 14, 2010 at 8:23 PM, <[email protected]> wrote: > > > I have had the same problem. > K7CDL > Ron > > *From:* Mark Cheavens <[email protected]> > *Sent:* Wednesday, July 14, 2010 5:48 PM > *To:* [email protected] > *Subject:* Re: [tracker2] Nuvi 350 Mounts Failing > > > > No solution, but I have had one fail at the same location. I thought mine > had failed due to the radar detector I had mounted to it as well. I feel > better knowing I am not alone! > > Mark > KC5EVE > > At 06:33 PM 7/14/2010, you wrote: > > > > The mount that came with my Nuvi 350 broke where the steel pin goes through > the suction cup part, first on one side and then on the other. I thought I > overstressed it taking the Nuvi out or putting it in, so I bought two more, > just to be sure. Now one of the new ones has broken and I have been VERY > careful with it. The plastic material looks very thin where it arches over > the steel pin. They felt like they needed a steel pin over 1/4" in diameter > and held it in place with 1/8" thick plastic. Is anyone else having this > problem, and if so, have you found a solution? > > Thanks, > > Al K5TAN > > >
