Here's a ink to a RAM mount I bought after my stock mount failed. http://www.gpscity.com/ram-mount-nuvi-3xx-series-locking-suction-cup-mount.html
As usual RAM built an excellent mount it uses the stock back plate to provide the power connection, but also has t own clips or retaining the gps. Mine has survived -35°C - +30°C temps with out falling off the window or cracking from being used in the cold. Sean, VE6SAR --- In [email protected], Al Waschka <awasc...@...> wrote: > > The mount that came with my Nuvi 350 broke where the steel pin goes through > the suction cup part, first on one side and then on the other. I thought I > overstressed it taking the Nuvi out or putting it in, so I bought two more, > just to be sure. Now one of the new ones has broken and I have been VERY > careful with it. The plastic material looks very thin where it arches over > the steel pin. They felt like they needed a steel pin over 1/4" in diameter > and held it in place with 1/8" thick plastic. Is anyone else having this > problem, and if so, have you found a solution? > > Thanks, > > Al K5TAN >
