The two mounts I bought were pictured as being different, but what was delivered was the Garmin OEM mount. I'd be interested in your source. Al
--- On Thu, 7/15/10, Randy Love <[email protected]> wrote: From: Randy Love <[email protected]> Subject: Re: [tracker2] Nuvi 350 Mounts Failing To: [email protected] Date: Thursday, July 15, 2010, 8:09 AM I have as well. My solution was after market mounts with a larger thickness in the arch. I'll try to track down the URL where I found them and forward it, but that was some time back and I haven't needed another one since. IIRC, they were only like $15 or so, plus $5 ship. Randy WF5X On Wed, Jul 14, 2010 at 8:23 PM, <[email protected]> wrote: I have had the same problem. K7CDL Ron From: Mark Cheavens Sent: Wednesday, July 14, 2010 5:48 PM To: [email protected] Subject: Re: [tracker2] Nuvi 350 Mounts Failing No solution, but I have had one fail at the same location. I thought mine had failed due to the radar detector I had mounted to it as well. I feel better knowing I am not alone! Mark KC5EVE At 06:33 PM 7/14/2010, you wrote: The mount that came with my Nuvi 350 broke where the steel pin goes through the suction cup part, first on one side and then on the other. I thought I overstressed it taking the Nuvi out or putting it in, so I bought two more, just to be sure. Now one of the new ones has broken and I have been VERY careful with it. The plastic material looks very thin where it arches over the steel pin. They felt like they needed a steel pin over 1/4" in diameter and held it in place with 1/8" thick plastic. Is anyone else having this problem, and if so, have you found a solution? Thanks, Al K5TAN
