--- In [email protected], Bob Poortinga <bobp+ya...@...> wrote: > > > I was experimenting with a low speed Smart Beacon Profile on a T2 (with > > integrated 5W VHF transceiver) and encountered an unexpectedly high > > beaconing rate when parked. > > Are you using Profile Switching? Do you have "Transmit when swiching to this > profile" enabled? If so, turn it off. > > > My settings were as follows: > > > > Slow Speed: 0.0 MPH TX rate: 7193 sec > > High Speed: 4 MPH TX rate: 61 sec > > Turn angle: 15 deg Max TX rate: 3 sec > > > > The shallow turn angle and fast TX rate was set to see if I could reliably > > double beacon on street corners. > > Why? This just adds QRM to the channel. > > -- > Bob Poortinga K9SQL <http://www.linkedin.com/in/bobpoortinga> > Bloomington, Indiana US >
I did have speed based profile switching on and was transmitting on switching. However the thresholds were above 15MPH and the unexpected rapid beaconing occurred while the vehicle was parked so I don't think that this could account for the behavior. I have disabled profile switching for testing.
