Yeah that's the same I got with Transfer 1.1 on CF9.
Rob, also confirm that it's your install of Transfer that is being used and not a mapping conflict again. --- James Allen E: [email protected] Blog: http://jamesallen.name Twitter: @CFJamesAllen (Coldfusion / Web development) Twitter: @jamesallenuk (General) Lead developer of http://errrrrrr.com From: [email protected] [mailto:[email protected]] On Behalf Of Mark Mandel Sent: 07 January 2010 11:24 To: [email protected] Subject: Re: [transfer-dev] Re: Error on init of transfer S'weird... sounds to me like the error I saw when running 1.1 on ColdFusion 9. Dump server scope, make sure its not lying to you? Mark On Thu, Jan 7, 2010 at 10:08 PM, Sir Rawlins <[email protected]> wrote: Hey Mark, My Host Pilot control panel is telling me it's version 8.0.1.195765 Rob On 7 Jan, 11:05, Mark Mandel <[email protected]> wrote: > You sure the shared host is CF8? > > Mark > > On Thu, Jan 7, 2010 at 10:01 PM, Sir Rawlins < > > > > > > [email protected]> wrote: > > Yeah I've tried that, also cleared out the FTP and uploaded a fresh > > copy of the site, still no change. > > > Think I may just move to another host which I know behaves with the > > frameworks. > > > Rob > > > On 7 Jan, 10:37, "James Allen" <[email protected]> wrote: > > > Have you tried upgrading to the latest bleeding edge version of Transfer? > > > > --- > > > James Allen > > > E: [email protected] > > > Blog:http://jamesallen.name > > > Twitter: @CFJamesAllen (Coldfusion / Web development) > > > Twitter: @jamesallenuk (General) > > > Lead developer ofhttp://errrrrrr.com > > > > -----Original Message----- > > > From: [email protected] [mailto: > > [email protected]] > > > > On Behalf Of Sir Rawlins > > > Sent: 07 January 2010 10:20 > > > To: transfer-dev > > > Subject: [transfer-dev] Re: Error on init of transfer > > > > O.k well I managed to convince the host to restart the service but still > > get > > > the same exception..... damn it! > > > > I hate dealing with shared hosting plans, I've never once had it run > > > smoothly. > > > > Rob > > > > On 6 Jan, 16:42, "James Allen" <[email protected]> wrote: > > > > Yeah for me it did. > > > > > I have definitely seen that error before so it may have been when I > > > > had the > > > > MG3 init issues. > > > > > --- > > > > James Allen > > > > E: [email protected] > > > > Blog:http://jamesallen.name > > > > Twitter: @CFJamesAllen (Coldfusion / Web development) > > > > Twitter: @jamesallenuk (General) > > > > Lead developer ofhttp://errrrrrr.com > > > > > -----Original Message----- > > > > From: [email protected] > > > > [mailto:[email protected]] > > > > > On Behalf Of Sir Rawlins > > > > Sent: 06 January 2010 16:35 > > > > To: transfer-dev > > > > Subject: [transfer-dev] Re: Error on init of transfer > > > > > Nice idea about CF9, I'm running on 8 though. > > > > > I have had some weird issues with MG init caused by other customers on > > > > the shared box using mappings which were causing issues, I had to put > > > > all my frameworks into a subdirectory and then create app-local > > > > mappings to them before it would get to this stage, I'm now wondering > > > > if that's maybe kicked MG into this weird state. > > > > > Does that require a restart of the CF service to solve? > > > > > Rob > > > > > On 6 Jan, 16:25, "James Allen" <[email protected]> wrote: > > > > > Hey there, > > > > > > It was more if you had got a timeout before this, as in MG3 if there > > > > > is a failure mid-init it can stay in a faulty state which causes all > > > > > manor of weird errors. I think I've seen this error in Transfer > > > > > before.. Aha, I think I may know what it is. > > > > > > You running CF9? > > > > > > If so you'll need the latest bleeding edge Transfer I think which > > > > > has some > > > > > CF9 fixes. > > > > > > Try that. > > > > > > --- > > > > > James Allen > > > > > E: [email protected] > > > > > Blog:http://jamesallen.name > > > > > Twitter: @CFJamesAllen (Coldfusion / Web development) > > > > > Twitter: @jamesallenuk (General) > > > > > Lead developer ofhttp://errrrrrr.com > > > > > > -----Original Message----- > > > > > From: [email protected] > > > > > [mailto:[email protected]] > > > > > > On Behalf Of Sir Rawlins > > > > > Sent: 06 January 2010 16:21 > > > > > To: transfer-dev > > > > > Subject: [transfer-dev] Re: Error on init of transfer > > > > > > Hey J, > > > > > > I've not managed to get the app to run at all yet, I just tried > > > > > hitting it with the ?init flag on the URL but that didn't appear to > > > > > make > > > > an difference. > > > > > > Thanks for the suggestion! :-D > > > > > > R > > > > > > On 6 Jan, 16:19, "James Allen" <[email protected]> wrote: > > > > > > Hi Rob, > > > > > > > Did you get any timeout's in MG before this error and then did a > > > > > > reinit before seeing this? > > > > > > > --- > > > > > > James Allen > > > > > > E: [email protected] > > > > > > Blog:http://jamesallen.name > > > > > > Twitter: @CFJamesAllen (Coldfusion / Web development) > > > > > > Twitter: @jamesallenuk (General) > > > > > > Lead developer ofhttp://errrrrrr.com > > > > > > > -----Original Message----- > > > > > > From: [email protected] > > > > > > [mailto:[email protected]] > > > > > > > On Behalf Of Sir Rawlins > > > > > > Sent: 06 January 2010 16:11 > > > > > > To: transfer-dev > > > > > > Subject: [transfer-dev] Error on init of transfer > > > > > > > Hello Guys, > > > > > > > I'm receiving the following exception when moving my application > > > > > > to a shared host, can anyone shed any light on what might be > > causing > > > it? > > > > > > > " > > > > > > Bean creation exception during init() of transfer.TransferFactory > > > > > > > The EXCEPTION argument passed to the init function is not of type > > > > > > struct.:If the component name is specified as a type of this > > > > > > argument, its possible that a definition file for the component > > > > > > cannot be found or is not accessible. > > > > > > " > > > > > > > Seems rather curious to me, I've not seen it before I don't think, > > > > > > I'm open to all suggestions. > > > > > > > Thanks, > > > > > > > Rob > > > -- > > Before posting questions to the group please read: > > >http://groups.google.com/group/transfer-dev/web/how-to-ask-support-qu... > > > You received this message because you are subscribed to the Google Groups > > "transfer-dev" group. > > To post to this group, send email to [email protected] > > To unsubscribe from this group, send email to > > [email protected] > > For more options, visit this group at > >http://groups.google.com/group/transfer-dev?hl=en > > -- > E: [email protected] > T:http://www.twitter.com/neurotic > W:www.compoundtheory.com -- Before posting questions to the group please read: http://groups.google.com/group/transfer-dev/web/how-to-ask-support-questions -on-transfer You received this message because you are subscribed to the Google Groups "transfer-dev" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/transfer-dev?hl=en -- E: [email protected] T: http://www.twitter.com/neurotic W: www.compoundtheory.com
-- Before posting questions to the group please read: http://groups.google.com/group/transfer-dev/web/how-to-ask-support-questions-on-transfer You received this message because you are subscribed to the Google Groups "transfer-dev" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/transfer-dev?hl=en
