Dave,
I've used D,S&G* for part 68 in the past, and they provided guidelines
as to what the hardware and software requirements are to perform the
required tests (test modes/states, etc.), and also a list of the tests.
Whatever lab you are going to use should also simplify the legalize
of part 68 for you. *(Boxborough MA)
It may also be that the FCC provides simpler guidelines for your
particular product as well, they do in some cases I know, so you might
check there.
Best regards,
Stephen C. Phillips
Telecom Engineer
===============================================
Direct: 508-244-8116 Fax: 508-244-8039
| | Cisco Systems, Inc.
||| ||| Core Business Unit
||||| ||||| 250 Apollo Drive
||||||||| ||||||||| Chelmsford, MA 01824
||||||||||||||||||||||||| U.S.A.
E-mail: [email protected]
===============================================
NOTE: CHANGE OF ADDRESS.
All opinions expressed are my own, not necessarily those of Cisco Systems.
----- Begin Included Message -----
>From [email protected] Thu Jul 25 10:13:22 1996
From: Dave Spalding <[email protected]>
To: "'[email protected]'" <[email protected]>
Subject: FCC Part 68
I am working on a modem project at Motorola and we are about to do Part =
68 and IC CS-03 testing. Is there a comprehensive list of tests needed =
for these standards written anywhere and the requirements. I have the =
specs but they read like... well, standards. I am looking for something =
in plain English if possible that I can use to understand the tests =
better. Thanks for any help anyone can provide.
Dave Spalding
David Spalding
Motorola ISG
20 Cabot Boulevard
M2-250
Mansfield, MA 02048-1193
Phone: (508) 261-4742
FAX: (508) 339-2346
EMail: [email protected]
----- End Included Message -----
