[email protected] wrote: > Can anyone help me please. I could do with some in-house IEC 801-2 > test gear. Does anyone know what's involved? Can anyone give me some > advice, instructions, part lists, equipment manufacturers names etc. > thanks in advance > JohnP
I've used Keytech, but others out there are just as good as long as they conform to the standard human model. Compliance Engineering is another. You want a good sheetmetal ground plane on the floor and on the bench. This was tricky due to the fact that when I grounded the sheetmetal to building ground, there was a float potential between building ground and ground in the wall outlet. You want everything a zero potential. For the bench I've gotten away with double sheets of aluminum foil. Don't do this if you are trying to construct a site by the letter of the law. Get different sizes of braid, copper tape and sandpaper for fixes. I also had to put warning tape (yellow/black) on the floor aroung the area because some people in the company had either pace makers or triple bypasses. This caused some grief, but nothing people couldn't get over. And that was it. ******************************************************* Doug McKean [email protected] ------------------------------------------------------- The comments and opinions stated herein are mine alone, and do not reflect those of my employer. ------------------------------------------------------- *******************************************************
