Reuben, Thanks for the "heads up", what type of equipment does TS100 apply to?
Ron Pipes Teltronics/SRX 4125 Keller Springs Rd. Dallas, Tx 75244 972-818-2829 x2201 Fax # 972-818-2893 >---------- >From: Reuben Medding[SMTP:[email protected]] >Sent: Sunday, April 12, 1998 6:30 PM >To: TREG INPUT >Subject: UPDATE TO BILL LYONS FAQ SOURCES MARCH 1998 > > >Dear Treggers, > >Bill Lyons recent issue of FAQ Sources had a section (1.10) dealing >with >the Australian requirements. The following helps to understand the >current >requirements. Bill will be adding this to the April issue. > >The current situation in Australia is evolving. > >1. AUSTEL PERMITTED PRODUCTS > > TS100 expires on the 30th June, 1998, hence Austel permits will no >longer >be valid after that date. Those permitted products will then need to >comply with the ACA Regime Labelling Notice No. 2, which includes a >requirement for Test Reports to current standards. This may be eased >as a >transitional provision. > >2. AGENTS > > Agents holding permits for Austel permitted products are able to >operate >until 30 June 1998. > > About November 1997, ACA advised individual Agents acting for overseas >manufacturers that they should no longer use the Supplier Codes >previously >issued to them. > > Labelling Notice No. 2, with effect from 1 January, 1998, included a >clarification that Agents could act for manufacturers and importers. >However, there are legal complications and overseas manufacturers would >be >advised to consult with their Agents or seek advice. The regulations >current reference to manufacturers relates to goods manufactured in >Australia. > > > > > >R Medding >R MEDDING & ASSOCIATES Consulting Engineers >EMAIL: [email protected]. FOR INTNL CALLS >Ph: 61-3-95328848 FAX: 61-3-95328849 >
