Hello Filiz
On Thu, 29 Oct 1998 11:03:23 -0500, you wrote:
>I understand that the FCC has recently changed the requirements regarding
>the maximum signal level which can be transmitted relating to voice/data
>over the switched network.
The FCC has not yet changed the requirements at this time it is only a
proposal.
>My question is, is this level change being incorporated into the digital
>(T1) side of the network, i.e. from the ISP to the CO or digital switch, or
>on the analog side from or to the subscriber? The concern is that existing
>modem code (V.90) may have to be changed to take advantage of the increased
>signal level.
The proposal is intended to allow power levels of up to -6dBm at the
analog side form/to the subscriber, so you would need to change the
modem V.90 code to take advantage.
>Where can I find some info on this change? I have searched the FCC web site
>but couldn't find anything.
Look for Docket 98-163 and if you still do not have any luck, drop me
an email with your fax number and I will send you the information.
Regards
Steve
>\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\<
Steve Wallace
Telecom Manager
BABT Product Service, Santa Clara, CA
Email : [email protected]
Telephone : 408 919 3771
Pager : 408 939 4210
>/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/<
