Ok I think this is how you do it (I'll double check when I get back to work tomorrow, that's where I have it still setup).
First add these lines to your /etc/modules.conf file: alias CDCEther off alias acm off alias usb0 usbnet Next create a file /etc/sysconfig/network-scripts/ifcfg-usb0 with: BOOTPROTO=static BROADCAST=192.168.129.255 IPADDR=192.168.129.1 NETMASK=255.255.255.0 NETWORK=192.168.129.0 DEVICE=usb0 (Double check these with the setting in your zaurus, I believe those should work with the zaurus defaults) That should bring up your network connection when you plug in your Zaurus and power it up. I'll double check when I get to work tomorrow post corrections if needed. Cheers, David On Tue, 2005-02-15 at 16:11, Roy Vestal wrote: > Ok, so i have the old sharp rom 2.37 and windows syncing and qtopia 1.7.0 > and fc1 sorta syncing. How do I setup hotplug to recognize it? > ----- Original Message ----- > From: "Roy Vestal" <[EMAIL PROTECTED]> > To: "Triangle Linux Users Group discussion list" <[email protected]> > Sent: Tuesday, February 15, 2005 11:23 AM > Subject: Re: [TriLUG] Syncing Zaurus with Linux > > > > Did you ever get it to sync with Windows? > > ----- Original Message ----- > > From: "Roy Vestal" <[EMAIL PROTECTED]> > > To: "Triangle Linux Users Group discussion list" <[email protected]> > > Sent: Tuesday, February 15, 2005 10:58 AM > > Subject: Re: [TriLUG] Syncing Zaurus with Linux > > > > > >> I'll try it. I did downgrade to 2.38 and it synced but I'm still going to > >> try OPIE > >> ----- Original Message ----- > >> From: "David A. Cafaro" <[EMAIL PROTECTED]> > >> To: "Triangle Linux Users Group discussion list" <[email protected]> > >> Sent: Monday, February 14, 2005 9:25 PM > >> Subject: Re: [TriLUG] Syncing Zaurus with Linux > >> > >> > >>> Yep, if you are running the 3.x series ROMs on the Zaurus, there is no > >>> sync solution with Linux. This guy was trying to reverse engineer it, > >>> but last I checked he had yet to get it all worked out: > >>> > >>> http://www.cyph.org/zsrep/ > >>> > >>> Best bet if you need to Sync with Linux is to use either the 2.3x series > >>> roms (all of which will sync with Qtopia, just be mind full of the open > >>> root ftp account), or to use OpenZaurus for your ROM: > >>> > >>> http://openzaurus.org/web/ > >>> > >>> OpenZaurus (Opie version) is what I currently run, and it syncs fine > >>> over Multsync. I gave up on Sharp, I think they have pretty much > >>> abandoned the US market and the older SL5x00 Zaurus models. Best to > >>> start getting hooked up with the Zaurus Users groups: > >>> > >>> http://www.zaurususergroup.org/ > >>> > >>> Oh, and just as a note, I Just got my new PalmOne Treo 650 Smartphone, > >>> and it's now syncing with Evolution :-). The Zaurus is now going to be > >>> my embedded Linux test machine. > >>> > >>> Cheers, > >>> David > >>> > >>> On Mon, 2005-02-14 at 16:01, Roy Vestal wrote: > >>>> usb > >>>> > >>>> i think i just found the problem. I've updated the ROM and according to > >>>> QT > >>>> folks, the new sharp rom will not sync with QTopiaDesktop on linux. :/ > >>>> > >>>> Anyone > >>>> ----- Original Message ----- > >>> -- David A. Cafaro dac(at)trilug.org Admin to User: "You did what!?!?!" -- TriLUG mailing list : http://www.trilug.org/mailman/listinfo/trilug TriLUG Organizational FAQ : http://trilug.org/faq/ TriLUG Member Services FAQ : http://members.trilug.org/services_faq/ TriLUG PGP Keyring : http://trilug.org/~chrish/trilug.asc
