Hi, It looks like you haven't gotten a lot of responses. I don't have one of the cards but I can tell you that the Diect TV signal can't be used to test the card. It isn't a DVB compliant signal. It was developed before the DVB standards were developed. Hughes based their system on the CLI "Magnitude" line of encoders with some special programming for the conditional access. Also, the DBS signals aren't in the same frequency band as the C and KU band satellites. I'm wondering what signal you are trying to get. According to Lyngsat.com there is no NOAA feed listed. I also can't find any NOAA signal listed on their web site. Whatever signal you want, the important part is that it is necessary to have to have the right satellite, polarity, frequency, symbol rate and all the rest to decode your signal. Just being a little off any of these parameters will get you a blank screen. John ----- Original Message ---- From: wa1vta01452 <[EMAIL PROTECTED]> To: [email protected] Sent: Saturday, August 5, 2006 9:41:56 AM Subject: [TVRO] Broadlogic DVB
Hi, I just purchased a Broadlogic 2030 DVB card. No software included. Looking to test the card and found ProgDVB site for driver. However, in addition to this software I think I may need a hardware driver for the card. Wonder if someone out there knows what the startup procedure is and where I could find the drivers. I plan to use the card for receiving a NOAA feed on AMC-3 but can I test the system with a standard DirecTV signal? I am using a 2.2 GHZ P4 machine with 1/2 gig ram. Thanks, Tom [Non-text portions of this message have been removed] Sat subcarrier and net streaming audio programming and locations: http://groups.yahoo.com/group/BROADCASTFINDER/ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/TVRO/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
