Have you used ProgDVB software? I am trying to verify what values I need to enter for my LNB which covers 11.7 ghz-12.2ghz and according to the box "LO=10.750" . I am looking for values to place in LOF1, Switch, and LOF2.
Tom --- In [email protected], "classicsat" <[EMAIL PROTECTED]> wrote: > > --- In [email protected], John Terhar <jterhar@> wrote: > > > > Hi, > > It looks like you haven't gotten a lot of responses. I don't have > one of the cards but I can tell you that the Diect TV signal can't be > used to test the card. It isn't a DVB compliant signal. It was > developed before the DVB standards were developed. Hughes based their > system on the CLI "Magnitude" line of encoders with some special > programming for the conditional access. > > > > It is mostly that it is not DVB. I understand though that at least one > of the DVB-PCI cards can tune DirecTV, and would woek if it weren't > for CA. > > > > Also, the DBS signals aren't in the same frequency band as the C and > KU band satellites. > > > > Not relavent, as it is all the same 950 to 1450 Mhz on the coax going > to the receiver/card ,from the dish/LNBF. > Sat subcarrier and net streaming audio programming and locations: http://groups.yahoo.com/group/BROADCASTFINDER/ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/TVRO/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
