http://oauth.net/core/1.0/#anchor9 This states that the callback parameter will come in for the Authorization step once the request token is obtained. Is the doc outdated or am i misinterpreting it?
On Aug 20, 7:19 pm, Taylor Singletary <[email protected]> wrote: > It sounds like your HMAC-SHA1 signature generation is not correct. I would > recommend going to the most basic examples in the OAuth specification ( best > walked through > here:http://hueniverse.com/2008/10/beginners-guide-to-oauth-part-iv-signin...) > and make sure you can create the same signatures as the examples -- > without ever making an actual API call -- before proceeding further. > > Once you are sure your signature generation algorithm can handle the basic > examples in the specification, move on to Twitter-specific requests. Attempt > exotic requests, like status updates with UTF-8 characters and spaces. > > Also important to note that the OAuth specification requires an > oauth_callback to be provided on the request_token step, regardless of > whether you've pre-specified it in your application record or not. If you're > not doing a URL-based callback, you should be providing oauth_callback=oob. > > Taylor > > On Fri, Aug 20, 2010 at 2:40 AM, Mukha Mudra > <[email protected]>wrote: > > > > > I STILL AM NOT ABLE TO GET THIS DONE > > The base url is > > POST&http%3A%2F%2Fapi.twitter.com%2Foauth > > %2Frequest_token&oauth_consumer_key%3DN3jplhm1n1ypCzg2eWEg2w > > %26oauth_nonce%3Dkh1282296538%26oauth_signature_method%3DHMAC- > > SHA1%26oauth_timestamp%3D1282296538%26oauth_version%3D1.0 > > > The signature created is somewhat like this > > yIVws5LaQmJq+ysYrKXLZ0l01wI > > > It is without = in the end. Is it mandatory to append it. > > I am referring this site.http://hueniverse.com/2008/10/beginners-guide- > > to-oauth-part-iv-signing-requests/ > > When i put my values, the base url is same that is generated. But the > > signature created by my program is different. > > > On emulator i get 'Failed to validate oauth signature and token' > > On device i get '401 unauthorized' > > > Has anyone tried it on Symbian before?? > > Plz help.... > > > On Aug 19, 3:15 pm, Tom van der Woerdt <[email protected]> wrote: > > > Yes, it is, and although this is one of the three forms you can use, the > > > header authorization is preferred. > > > > Tom > > > > On 8/19/10 10:06 AM, Mukha Mudra wrote: > > > > > I read in the documentation example the following. > > > > Authorization: OAuth realm="http://photos.example.net/";, > > > > oauth_consumer_key="dpf43f3p2l4k3l03", > > > > oauth_token="nnch734d00sl2jdk", > > > > oauth_signature_method="HMAC-SHA1", > > > > oauth_signature="tR3%2BTy81lMeYAr%2FFid0kMTYa%2FWM > > > > %3D", > > > > oauth_timestamp="1191242096", > > > > oauth_nonce="kllo9940pd9333jh", > > > > oauth_version="1.0" > > > > > Is this header required? > > > > > On Aug 19, 11:23 am, Mukha Mudra <[email protected]> wrote: > > > >> Ok tried that. > > > >> Base url > > > >> POST&https%3A%2F%2Fapi.twitter.com%2Foauth > > > >> %2Frequest_token&oauth_consumer_key > > > %3D*******************************************%26oauth_signature_method > > > >> %3DHMAC-SHA1%26oauth_nonce%3Dkh2147483647%26oauth_timestamp > > > >> %3D1282198197%26oauth_version%3D1.0 > > > > >> When i use https i get Twitter Is Over Capacity > > > >> When i use http i get 401 Unauthorised > > > >> I am trying to access from a SYmbian Http client.Will that make any > > > >> difference? > > > >> The User Agent in header is "SimpleClient 1.0" > > > > >> On Aug 19, 11:05 am, Mukha Mudra <[email protected]> wrote: > > > > >>> Thanks Matt let me try that.. I read in the documentation that > > > >>> oauth_version is OPTIONAL and if not submitted the Service Provider > > > >>> will take it as 1.0. Anyways will try that. Also can you tell me > > > >>> should be using just http or https for url? > > > > >>> On Aug 19, 10:43 am, Matt Harris <[email protected]> wrote: > > > > >>>> Hi Mukha, > > > > >>>> Your base string and API seems to be missing the oauth_version > > parameter > > > >>>> which you should be setting to 1.0. Also, the URL in your base > > string is > > > >>>> seems to be missing the protocol 'http'. Yours starts POST&%3A%2F%2F > > when it > > > >>>> should be POST&http%3A%2F%2F > > > > >>>> Hope that helps, > > > >>>> Matt > > > > >>>> On Wed, Aug 18, 2010 at 8:53 PM, Mukha Mudra < > > [email protected]>wrote: > > > > >>>>> Thanks Taylor. > > > >>>>> I changed that and base string is now like this > > > >>>>> POST&%3A%2F%2Fapi.twitter.com%2Foauth > > > >>>>> %2Frequest_token&oauth_consumer_key%3D************************* > > > >>>>> %26oauth_signature_method%3DHMAC-SHA1%26oauth_timestamp > > > >>>>> %3D1282189027%26oauth_nonce%3Dkh432142249 > > > > >>>>> I call the url with query parameters according to the Jane example > > > >>>>> provided in Appendix of documentation. > > >http://api.twitter.com/oauth/request_token?oauth_consumer_key=*******... > > > > >>>>> But now i get "401 Unauthorized" > > > >>>>> I have checked my consumer key and secret key.They seem to be > > > >>>>> alright.What could be happening? > > > >>>>> Should open another post for this? > > > > >>>>> On Aug 19, 12:17 am, Taylor Singletary < > > [email protected]> > > > >>>>> wrote: > > > >>>>>> There are many elements to Twitter, the API, and the stack the > > runs the > > > >>>>>> whole site. It is possible, though rare, that you'll see this > > error in > > > >>>>> other > > > >>>>>> conditions. > > > > >>>>>> Looking at your signature base string here, I notice that you > > don't > > > >>>>> include > > > >>>>>> a separator between the URL you are executing and the parameters > > -- that > > > >>>>>> first %26 you have in your signature base string shouldn't be > > encoded.. > > > >>>>> it > > > >>>>>> should just be "&" as it works as a separator between portions: > > > > >>>>>> $HTTP_METHOD + "&" percent_encoded($REQUEST_URI) + "&" > > > >>>>>> percent_encoded($URL_ENCODED_PARAMETERS) > > > > >>>>>> Taylor > > > > >>>>>> On Wed, Aug 18, 2010 at 12:03 PM, Tom van der Woerdt < > > [email protected]> > > > >>>>> wrote: > > > > >>>>>>> On 8/18/10 8:24 PM, Mukha Mudra wrote: > > > >>>>>>>> Hi All, > > > >>>>>>>> I just began to connect a Symbian application to > > Twitter > > > >>>>> via > > > >>>>>>>> the REST API. > > > > >>>>>>>> The base URL used in signature is as follows > > > >>>>>>>> POST&%3A%2F%2Fapi.twitter.com%2Foauth%2Frequest_token > > > >>>>>>>> %26oauth_consumer_key%3D*************************** > > > >>>>>>>> %26oauth_signature_method%3DHMAC-SHA1%26oauth_timestamp > > > >>>>>>>> %3D1282155396%26oauth_nonce%3Dkh511263264 > > > > >>>>>>>> In response i get the Twitter Over Capacity html page. > > > > >>>>>>>> Since I have just begun , I am not sure that apart from server > > > >>>>>>>> overloading , by any chance, does a wrong invocation of the API > > also > > > >>>>>>>> gives this error. > > > > >>>>>>>> Regards > > > >>>>>>>> Biju > > > > >>>>>>> It does not. > > > > >>>>>>> Tom > > > > >>>> -- > > > > >>>> Matt Harris > > > >>>> Developer Advocate, Twitterhttp://twitter.com/themattharris
