Arno Garrels wrote: > Patrick Schmidt - STEP Software GmbH wrote: >>> Later you change to that directory and request a dir list. The >>> server somewhat hang creating the directory list. After 2 minutes >>> the connection is >>> closed (probably an inactivity timeout at server side). >> After this time (and error-message) the client gets the list and >> loads every file in the list! >> That's strange... > > I bet the delay starts after the server called Data.ShutDown(1) > in FtpSrv.pas, TFtpServer.WMFtpSrvCloseData, can you please > set a breakpoint there and check whether that this is true?
That exactly was the case, Patrick wrote me in a personal mail that the developer of the client had to fix a bug in his code, TFtpSrv rocks :) -- Arno Garrels [TeamICS] http://www.overbyte.be/eng/overbyte/teamics.html > > -- > Arno Garrels [TeamICS] > http://www.overbyte.be/eng/overbyte/teamics.html > >> >>> Try with passive mode. >> Passive mode is not possible, my client is a (Hardware-)Lighting- >> console. The only options to configure in console are: IP, user, pw >> and a directory >> >>> Can you reproduce this behaviour using another FTP client software >>> using the >>> same conditions ? >> No, only this combination. If I try other client (eg Filezilla) it >> works and if i try other >> server (G6 FTP Server) with the console it works, too! :-( >> >> best regards >> Patrick Schmidt >> >> ----- Original Message ----- >> From: "Francois PIETTE" <[EMAIL PROTECTED]> >> To: "ICS support mailing" <twsocket@elists.org> >> Sent: Wednesday, April 18, 2007 4:20 PM >> Subject: Re: [twsocket] 501 Cannot RETR. Error - Socket with >> icsFtpServ (V6forDelphi7) >> >> >>>> My FTP-Client send a "LIST" which is not handled correctly. After >>>> the "LIST" >>>> it takes about 2 minutes until the error is displayed and after >>>> that the client >>>> gets the direcory listing. >>>> Answer to client: 550 'F:\PROJ\grandMA ftp\slp': can't create >>>> directory. >>> >>> You are creating a directory and you don't have permission. Maybe >>> already exists. Should not be the problem. >>> >>>> ! Answer to client: 150 Opening data connection for directory >>>> list. !!! Here the communication hang for nearly 2 minutes !!! >>>> ! Answer to client: 501 Cannot RETR. Error - Socket is not >>>> connected >>> >>> Later you change to that directory and request a dir list. The >>> server somewhat hang creating the directory list. After 2 minutes >>> the connection is >>> closed (probably an inactivity timeout at server side). >>> >>> Try with passive mode. >>> >>> Can you reproduce this behaviour using another FTP client software >>> using the >>> same conditions ? >>> >>> >>> -- >>> Contribute to the SSL Effort. Visit >>> http://www.overbyte.be/eng/ssl.html -- >>> [EMAIL PROTECTED] >>> http://www.overbyte.be >>> >>> >>> >>> ----- Original Message ----- >>> From: "Patrick Schmidt - STEP Software GmbH" <[EMAIL PROTECTED]> >>> To: <twsocket@elists.org> >>> Sent: Wednesday, April 18, 2007 4:08 PM >>> Subject: [twsocket] 501 Cannot RETR. Error - Socket with icsFtpServ >>> (V6 forDelphi7) >>> >>> >>>> STEP >>>> My FTP-Client send a "LIST" which is not handled correctly. After >>>> the "LIST" >>>> it >>>> takes about 2 minutes until the error is displayed and after that >>>> the client >>>> gets >>>> the direcory listing. >>>> >>>> See log-file: >>>> 192.168.200.167 connected >>>> Client-Command: USER MA >>>> Answer to client: 331 Password required for MA. >>>> Client-Command: PASS ma >>>> Login Username:MA Password:ma >>>> Answer to client: 230 User MA logged in. >>>> Client-Command: TYPE I >>>> Answer to client: 200 Type set to I. >>>> Client-Command: MKD slp >>>> Make Directory: F:\PROJ\grandMA ftp\slp >>>> Answer to client: 550 'F:\PROJ\grandMA ftp\slp': can't create >>>> directory. Client-Command: CWD slp >>>> Change Directory: F:\PROJ\grandMA ftp\slp\ >>>> Answer to client: 250 CWD command successful. "F:/PROJ/grandMA >>>> ftp/slp/" is >>>> current directory. >>>> Client-Command: PORT 192,168,200,167,4,205 >>>> Answer to client: 200 Port command successful. >>>> Client-Command: LIST >>>> ! Answer to client: 150 Opening data connection for directory >>>> list. !!! Here the communication hang for nearly 2 minutes !!! >>>> ! Answer to client: 501 Cannot RETR. Error - Socket is not >>>> connected (#10057) >>>> >>>> best regards >>>> Patrick Schmidt >>>> >>>> -- >>>> To unsubscribe or change your settings for TWSocket mailing list >>>> please goto http://www.elists.org/mailman/listinfo/twsocket >>>> Visit our website at http://www.overbyte.be >>> >>> -- >>> To unsubscribe or change your settings for TWSocket mailing list >>> please goto http://www.elists.org/mailman/listinfo/twsocket >>> Visit our website at http://www.overbyte.be -- To unsubscribe or change your settings for TWSocket mailing list please goto http://www.elists.org/mailman/listinfo/twsocket Visit our website at http://www.overbyte.be
