On Thursday 13 March 2008, Pawel Pastuszak wrote: > I trying to get nand flashing working for powerpc 405ep, i am currently > having some problem with read and writing to the flash. I was wondering if > anybody got the MT29F2G08 flash working.
Sure. It's working on multiple 405EP implementation I have seen so far. Perhaps not exactly with the NAND chips you mentioned. But that shouldn't really matter. You are aware that the 405EP doesn't have a build-in NAND controller and you need minimal external logic to connect a NAND chip to the 405EP? Best regards, Stefan ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: [EMAIL PROTECTED] ===================================================================== ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users
