I've been trying to get Das u-boot going on my S3C2410 based board and had no luck so far. Just trying to get something over the serial port for now. I have a Wiggler to JTAG the initial u-boot.bin
Part of the problem is the target is brand new and not supported by anybody yet. I'm wondering if there's a similar board already supported by u-boot? Its the CUWin at http://cubloc.com/product/05_01.php NOR Am29LV800 NAND 2 x K9F1208 RAM 64MB SDRAM No extra drivers, just the built in S3C2410 LCD, serial, ethernet et. al. I'd like to put u-boot in NOR to save some NAND space and because I can't make heads nor tails out of this steppingstones stuff. Thanks for your patience and help! ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users
