In message <[EMAIL PROTECTED]> you wrote:
>
> > I changed the boot delay in configs/smdk2410.h to -1 to make sure I
> > could get the right port (swapping the cable around in case it wasn't
> > uart 0 being used. I also tried 60 delay. Still nothing.
I am not really sure if the smdk2410 port is working at all at the
moment.
> It was some time ago, I last used the SMDK2410. But I'm pretty sure,
> that it prints some boot messages. You should see this messages regardles
> if you boot from flash, ethernet, or whatever.
I can only speak for the s3c2400 (trab, and most probably also
smdk2400), which were broken by this commit:
commit 80767a6cead9990d9e77e62be947843c2c72f469
Author: Peter Pearse <[EMAIL PROTECTED]>
Date: Wed Sep 5 16:04:41 2007 +0100
Changed API name to coloured_led.h
Removed code using deprecated ifdef CONFIG_BOOTBINFUNC
Tidied other cpu/arm920t/start.S code
You may want to try the commit previous to this one...
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED]
Don't panic.
-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace
_______________________________________________
U-Boot-Users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/u-boot-users
