That was it! Went back to 1.2.0, flashed my NOR and upon reboot got the uboot menu.
Thanks very much! Being new to this stuff I always assume its me doing something wrong and spend a few days wracking my brain and overheating the google servers before actually asking a question. I learn a lot but its hard on the hairline 8) Pat Meloy Canuckleland On Thu, 2008-04-03 at 20:20 +0200, Wolfgang Denk wrote: > In message <[EMAIL PROTECTED]> you wrote: > > > > > I changed the boot delay in configs/smdk2410.h to -1 to make sure I > > > could get the right port (swapping the cable around in case it wasn't > > > uart 0 being used. I also tried 60 delay. Still nothing. > > I am not really sure if the smdk2410 port is working at all at the > moment. > > > It was some time ago, I last used the SMDK2410. But I'm pretty sure, > > that it prints some boot messages. You should see this messages regardles > > if you boot from flash, ethernet, or whatever. > > I can only speak for the s3c2400 (trab, and most probably also > smdk2400), which were broken by this commit: > > commit 80767a6cead9990d9e77e62be947843c2c72f469 > Author: Peter Pearse <[EMAIL PROTECTED]> > Date: Wed Sep 5 16:04:41 2007 +0100 > > Changed API name to coloured_led.h > Removed code using deprecated ifdef CONFIG_BOOTBINFUNC > Tidied other cpu/arm920t/start.S code > > You may want to try the commit previous to this one... > > Best regards, > > Wolfgang Denk > ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users
