Eric BENARD schreef: > Stelian Pop a écrit : >> Hmm, if I sed: >> s/KS8721/DM9161/g >> and >> s/ks8721/dm9161/g >> >> on your files I find almost no change with regard to the original >> version, except: >> >> #define PHY_ADDRESS (1<<5) >> >> and a #if 0 commenting out a bit of the initialisation sequence... >> > yes, goal was to make a clean driver starting from dm9161 with > PHY_ADDRESS in the config file ... but I didn't had time to progress > on it :-( > Isolate problem can happen depending on the pullup/down configuration > I think (I didn't check in tthe datasheet, but I once met the problem). > >> This makes me think it may only be a PHY_ADDRESS issue: what happens if >> you change in cpu/arm926ejs/at91sam9/ether.c : >> >> macb_eth_initialize(0, (void *)AT91_BASE_EMAC, 0x00); >> >> to >> >> macb_eth_initialize(0, (void *)AT91_BASE_EMAC, 1<<5); >> > It's not running on a 9260 so I can't test but it should work (and > this may be the problem Sander have). > > Eric I did a new build with:
macb_eth_initialize(0, (void *)AT91_BASE_EMAC, 1<<5); in stead of: macb_eth_initialize(0, (void *)AT91_BASE_EMAC, 0x00); But still no PHY detected :-( The files that Eric send were for a AT91RM9200? and don't work on my AT91SAM9260? Sander ------------------------------------------------------------------------- This SF.net email is sponsored by the 2008 JavaOne(SM) Conference Register now and save $200. Hurry, offer ends at 11:59 p.m., Monday, April 7! Use priority code J8TLD2. http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users
