Sander Vermin a écrit : > I did a new build with: > > macb_eth_initialize(0, (void *)AT91_BASE_EMAC, 1<<5); > > in stead of: > > macb_eth_initialize(0, (void *)AT91_BASE_EMAC, 0x00); > > But still no PHY detected :-( > You need to check your schematic, and the PHY datasheet in order to know what could be the address of your PHY (set by pull up/down resistors on several pins of the PHY at reset of the PHY).
Or you can try a loop on the PHY address and see if it answers at any address ... Eric ------------------------------------------------------------------------- This SF.net email is sponsored by the 2008 JavaOne(SM) Conference Register now and save $200. Hurry, offer ends at 11:59 p.m., Monday, April 7! Use priority code J8TLD2. http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users
