In message <[EMAIL PROTECTED]> you wrote: > > Is it acceptable to define it as 1024 on some boards? It's more accurate > if you're running the timer from a 32.768 kHz oscillator (e.g. an RTC), > and it makes timing calculations cheaper too...
We use a millisecond tick, so CFG_HZ == 1000. Accuracy is not really an issue in almost all cases. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED] A witty saying proves nothing, but saying something pointless gets people's attention. ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users
