On Wed, May 28, 2008 at 08:12:28PM +0200, Wolfgang Grandegger wrote: > This patch adds support for NAND FLASH on the TQM8548. It is disabled by > default and can be enabled for the TQM8548 modules. Note that the R/B pin > is not supported by that module requiring to use the specified maximum > delay time. > > Note: With NAND support enabled the size of the U-Boot image exceeds > 256 KB and TEXT_BASE must therefore be set to 0xfff80000 in config.mk, > doubling the image size :-(.
What does this do differently from the code in drivers/mtd/nand/fsl_upm.c? How much of this is board-specific? -Scott ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users
