Scott Wood wrote: > On Wed, May 28, 2008 at 08:12:28PM +0200, Wolfgang Grandegger wrote: >> This patch adds support for NAND FLASH on the TQM8548. It is disabled by >> default and can be enabled for the TQM8548 modules. Note that the R/B pin >> is not supported by that module requiring to use the specified maximum >> delay time. >> >> Note: With NAND support enabled the size of the U-Boot image exceeds >> 256 KB and TEXT_BASE must therefore be set to 0xfff80000 in config.mk, >> doubling the image size :-(. > > What does this do differently from the code in drivers/mtd/nand/fsl_upm.c?
Maybe it does not support multi banks on a NAND chip. I have to check. > How much of this is board-specific? Well, I already gave drivers/mtd/nand/fsl_upm.c a try but was unable to get it working on this board. Therefore I decided to keep this known to work driver which we have already for a while. With Linux, I had more success. Wolfgang. ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users
