Ben, after pulling u-boot today ethernet stopped working on my MPC8343 based board (mvBL-M7). I'm using a Vitesse VSC8601 RGMII phy on TSEC0-1.
I know there's some rewriting/clean-up going on ... What do I have to do to get it working again ? Any new defines introduced lately ? Obviously the MII interface stopped working, i.e. all reads give 0xFF. Switching back to older U-boot (3-4 weeks ago) works fine. Any help is welcome. regards, Andre MATRIX VISION GmbH, Talstraße 16, DE-71570 Oppenweiler - Registergericht: Amtsgericht Stuttgart, HRB 271090 Geschäftsführer: Gerhard Thullner, Werner Armingeon, Uwe Furtner ------------------------------------------------------------------------- Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW! Studies have shown that voting for your favorite open source project, along with a healthy diet, reduces your potential for chronic lameness and boredom. Vote Now at http://www.sourceforge.net/community/cca08 _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users
