Kim Phillips schrieb: > On Wed, 02 Jul 2008 18:01:01 +0200 > Andre Schwarz <[EMAIL PROTECTED]> wrote: > > >> this is a fully configured board, i.e. serial# and ethaddr/eth1addr set >> up correctly. >> >> I'll give the bisect a try a soon as there'll be some time. >> >> > just to clarify, are you using the mainline u-boot.git tree, or > u-boot-mpc83xx.git? you should be using the latter until I ask WD to > pull. Actually, if you can confirm it corrects your problem, I have no > reason to delay it further (I was waiting for WD to get back from > vacation). > > Kim > Kim,
I'm running from mainline. Do you want me to give u-boot-mpc83xx.git a try ? After all I think the problem is lurking on my hardware/network somewhere. I need some more time ... regards, Andre MATRIX VISION GmbH, Talstraße 16, DE-71570 Oppenweiler - Registergericht: Amtsgericht Stuttgart, HRB 271090 Geschäftsführer: Gerhard Thullner, Werner Armingeon, Uwe Furtner ------------------------------------------------------------------------- Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW! Studies have shown that voting for your favorite open source project, along with a healthy diet, reduces your potential for chronic lameness and boredom. Vote Now at http://www.sourceforge.net/community/cca08 _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users
