Hi Andre, On Wed, Jul 2, 2008 at 7:03 AM, Andre Schwarz <[EMAIL PROTECTED]> wrote: > Ben, > > after pulling u-boot today ethernet stopped working on my MPC8343 based > board (mvBL-M7). > I'm using a Vitesse VSC8601 RGMII phy on TSEC0-1. > > I know there's some rewriting/clean-up going on ... > Yeah, but none of that's in the main source tree.
> What do I have to do to get it working again ? > Any new defines introduced lately ? > > Obviously the MII interface stopped working, i.e. all reads give 0xFF. > Switching back to older U-boot (3-4 weeks ago) works fine. Looking here: http://git.denx.de/?p=u-boot.git;a=history;f=drivers/net/tsec.c;h=6e0f2c6fd081baa19d80a985717d470a1f78bc2d;hb=HEAD nothing new has been added except support for a new PHY, and that was about 5 weeks ago. > > Any help is welcome. > Sorry, I don't have access to my MPC8349 board right now or I'd try to help more usefully. Maybe you can post some more information. > regards, > Andre > > MATRIX VISION GmbH, Talstraße 16, DE-71570 Oppenweiler - Registergericht: > Amtsgericht Stuttgart, HRB 271090 > Geschäftsführer: Gerhard Thullner, Werner Armingeon, Uwe Furtner > regards, Ben ------------------------------------------------------------------------- Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW! Studies have shown that voting for your favorite open source project, along with a healthy diet, reduces your potential for chronic lameness and boredom. Vote Now at http://www.sourceforge.net/community/cca08 _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users
