Hello Wolfgang
Lets find a solution to support ML507 on u-boot (and make my work
availiable to more people). I am completly with you about the low
quality of the xilinx-adapted code. I am using it for two things: i2c
and ethernet, but the board can perfetly work without them. The i2c
code can be very simply adapted to the "good way".
Tomorrow I will work on a patch for the CPU, ADT7640, Uart Lite and
the board without i2c and in the near future I will provide a "clean"
driver for the xilinx i2c.
How does it sounds for you?
Best regards
--
Ricardo Ribalda
http://www.eps.uam.es/~rribalda/
-------------------------------------------------------------------------
Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW!
Studies have shown that voting for your favorite open source project,
along with a healthy diet, reduces your potential for chronic lameness
and boredom. Vote Now at http://www.sourceforge.net/community/cca08
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users
