Hi Hong Xu, On Thu, Jul 24, 2008 at 1:05 AM, Hong Xu <[EMAIL PROTECTED]> wrote: > >From 81230b02610c06fdc8a175e635851346488e3bdb Mon Sep 17 00:00:00 2001 > From: Hong Xu <[EMAIL PROTECTED]> > Date: Thu, 24 Jul 2008 14:25:05 +0800 > Subject: [PATCH 1/1] Add support for ATMEL AT91SAM9G20EK board > > This patch adds support for ATMEL AT91SAM9G20EK board. > User manual for AT91SAM9G20EK board, see > http://www.atmel.com/dyn/resources/prod_documents/doc6413.pdf > AT91 SAM9G20 datasheet, see > http://www.atmel.com/dyn/resources/prod_documents/doc6384.pdf > > Signed-off-by: Hong Xu <[EMAIL PROTECTED]> > --- <snip> > diff --git a/net/eth.c b/net/eth.c > index 38979aa..3f50e2b 100644 > --- a/net/eth.c > +++ b/net/eth.c > @@ -287,7 +287,7 @@ int eth_initialize(bd_t *bis) > mcdmafec_initialize(bis); > #endif > #if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \ > - defined(CONFIG_AT91SAM9263) > + defined(CONFIG_AT91SAM9263) || defined(CONFIG_AT91SAM9G20) > at91sam9_eth_initialize(bis); > #endif >
Please don't touch net/eth.c. Instead, implement the following in board code: int board_eth_init(bd_t *bis); Please be sure to check that the weak version of board_eth_init() is overridden (the board_eth_init and __def_eth_init symbols should have different addresses in the object code). You can do something like: $ cat System.map | grep eth_init regards, Ben ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users
