hi Wolfgang, i used BMW configuration and now o/p is
U-Boot 1.1.6 (Sep 3 2008 - 21:48:59) CPU: MPC8245 Revision 1.2 at 198 MHz: 16 kB I-Cache 16 kB D-Cache Board: BMW MPC8245/KAHLUA2 - CHRP (MAP B) Built: Sep 3 2008 at 21:48:59 Local Bus at 99 MHz DRAM: 64 MB FLASH: *** failed *** ### ERROR ### Please RESET the board ### What are macros i have to look at to pass the FLASH test.and actual DRAM is 256 MB but its showing 64 MB. Regards, Ramji On Wed, Sep 3, 2008 at 9:00 PM, John W. Linville <[EMAIL PROTECTED]>wrote: > On Wed, Sep 03, 2008 at 08:44:37PM +0530, Ramji PanchaReddy wrote: > > Hi Wolfgang, > > Thanks a lot for your response .. > > > > I also tried BMW_config and used cross-compiler as ppc_82xx-* .When i > load > > this i did not get any thing on console. > > My processor is MPC8245. > > From what I recall about BMW, you probably want to go through the > BMW-related configuration bits and verify all the clock settings, > memory settings, etc for your exact version of the board. IIRC the > vendor was a bit prone to changing such things between different > versions. > > Good luck! > > John > -- > John W. Linville > [EMAIL PROTECTED] >
_______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
