On Fri, May 24, 2013 at 6:39 AM, Kuo-Jung Su <[email protected]> wrote: > From: Kuo-Jung Su <[email protected]> > > Add support for Winbond's W25PXX SPI flash. > These devices is used on Faraday A369 evaluation board. > > Signed-off-by: Kuo-Jung Su <[email protected]> > CC: Jagan Teki <[email protected]> > CC: Tom Rini <[email protected]> > --- > Changes for v2: > - Update commit message header > - Add commit message body > > drivers/mtd/spi/winbond.c | 17 ++++++++++++++++- > 1 file changed, 16 insertions(+), 1 deletion(-) > > diff --git a/drivers/mtd/spi/winbond.c b/drivers/mtd/spi/winbond.c > index 2716209..2a27837 100644 > --- a/drivers/mtd/spi/winbond.c > +++ b/drivers/mtd/spi/winbond.c > @@ -18,6 +18,21 @@ struct winbond_spi_flash_params { > > static const struct winbond_spi_flash_params winbond_spi_flash_table[] = { > { > + .id = 0x2014, > + .nr_blocks = 16, > + .name = "W25P80", > + }, > + { > + .id = 0x2015, > + .nr_blocks = 32, > + .name = "W25P16", > + }, > + { > + .id = 0x2016, > + .nr_blocks = 64, > + .name = "W25P32", > + }, > + { > .id = 0x3013, > .nr_blocks = 8, > .name = "W25X40", > @@ -104,7 +119,7 @@ struct spi_flash *spi_flash_probe_winbond(struct > spi_slave *spi, u8 *idcode) > } > > flash->page_size = 256; > - flash->sector_size = 4096; > + flash->sector_size = (idcode[1] == 0x20) ? 65536 : 4096; > flash->size = 4096 * 16 * params->nr_blocks; > > return flash; > -- > 1.7.9.5 >
Reviewed-by: Jagannadha Sutradharudu Teki <[email protected]> -- Thanks, Jagan. _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
