The MIPI CORE DPHY pad declarations in mx6q_pins.h were abbreviated differently than in mx6dl_pins.h.
This patch updates them to match the DL versions and the Freescale Linux 3.x headers. No functional changes are introduced by this patch and there are no current users of these declarations. Signed-off-by: Eric Nelson <[email protected]> --- arch/arm/include/asm/arch-mx6/mx6q_pins.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/include/asm/arch-mx6/mx6q_pins.h b/arch/arm/include/asm/arch-mx6/mx6q_pins.h index 2d7199a..64c28ce 100644 --- a/arch/arm/include/asm/arch-mx6/mx6q_pins.h +++ b/arch/arm/include/asm/arch-mx6/mx6q_pins.h @@ -492,21 +492,21 @@ enum { MX6_PAD_EIM_BCLK__TPSMP_HDATA_31 = IOMUX_PAD(0x046C, 0x0158, 6, 0x0000, 0, 0), MX6_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK = IOMUX_PAD(0x0470, 0x015C, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), MX6_PAD_DI0_DISP_CLK__IPU2_DI0_DISP_CLK = IOMUX_PAD(0x0470, 0x015C, 1, 0x0000, 0, 0), - MX6_PAD_DI0_DISP_CLK__MIPI_CR_DPY_OT28 = IOMUX_PAD(0x0470, 0x015C, 3, 0x0000, 0, 0), + MX6_PAD_DI0_DISP_CLK__MIPI_CORE_DPHY_TEST_OUT_28 = IOMUX_PAD(0x0470, 0x015C, 3, 0x0000, 0, 0), MX6_PAD_DI0_DISP_CLK__SDMA_DEBUG_CORE_STATE_0 = IOMUX_PAD(0x0470, 0x015C, 4, 0x0000, 0, 0), MX6_PAD_DI0_DISP_CLK__GPIO_4_16 = IOMUX_PAD(0x0470, 0x015C, 5, 0x0000, 0, 0), MX6_PAD_DI0_DISP_CLK__MMDC_MMDC_DEBUG_0 = IOMUX_PAD(0x0470, 0x015C, 6, 0x0000, 0, 0), MX6_PAD_DI0_PIN15__IPU1_DI0_PIN15 = IOMUX_PAD(0x0474, 0x0160, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), MX6_PAD_DI0_PIN15__IPU2_DI0_PIN15 = IOMUX_PAD(0x0474, 0x0160, 1, 0x0000, 0, 0), MX6_PAD_DI0_PIN15__AUDMUX_AUD6_TXC = IOMUX_PAD(0x0474, 0x0160, 2, 0x0000, 0, 0), - MX6_PAD_DI0_PIN15__MIPI_CR_DPHY_OUT_29 = IOMUX_PAD(0x0474, 0x0160, 3, 0x0000, 0, 0), + MX6_PAD_DI0_PIN15__MIPI_CORE_DPHY_TEST_OUT_29 = IOMUX_PAD(0x0474, 0x0160, 3, 0x0000, 0, 0), MX6_PAD_DI0_PIN15__SDMA_DEBUG_CORE_STATE_1 = IOMUX_PAD(0x0474, 0x0160, 4, 0x0000, 0, 0), MX6_PAD_DI0_PIN15__GPIO_4_17 = IOMUX_PAD(0x0474, 0x0160, 5, 0x0000, 0, 0), MX6_PAD_DI0_PIN15__MMDC_MMDC_DEBUG_1 = IOMUX_PAD(0x0474, 0x0160, 6, 0x0000, 0, 0), MX6_PAD_DI0_PIN2__IPU1_DI0_PIN2 = IOMUX_PAD(0x0478, 0x0164, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), MX6_PAD_DI0_PIN2__IPU2_DI0_PIN2 = IOMUX_PAD(0x0478, 0x0164, 1, 0x0000, 0, 0), MX6_PAD_DI0_PIN2__AUDMUX_AUD6_TXD = IOMUX_PAD(0x0478, 0x0164, 2, 0x0000, 0, 0), - MX6_PAD_DI0_PIN2__MIPI_CR_DPHY_OUT_30 = IOMUX_PAD(0x0478, 0x0164, 3, 0x0000, 0, 0), + MX6_PAD_DI0_PIN2__MIPI_CORE_DPHY_TEST_OUT_30 = IOMUX_PAD(0x0478, 0x0164, 3, 0x0000, 0, 0), MX6_PAD_DI0_PIN2__SDMA_DEBUG_CORE_STATE_2 = IOMUX_PAD(0x0478, 0x0164, 4, 0x0000, 0, 0), MX6_PAD_DI0_PIN2__GPIO_4_18 = IOMUX_PAD(0x0478, 0x0164, 5, 0x0000, 0, 0), MX6_PAD_DI0_PIN2__MMDC_MMDC_DEBUG_2 = IOMUX_PAD(0x0478, 0x0164, 6, 0x0000, 0, 0), -- 1.8.1.2 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
