Hi Steve, > Signed-off-by: Steve Rae <[email protected]> > --- > > Changes in v2: None > > drivers/usb/gadget/s3c_udc_otg.c | 4 ++++ > 1 file changed, 4 insertions(+) > > diff --git a/drivers/usb/gadget/s3c_udc_otg.c > b/drivers/usb/gadget/s3c_udc_otg.c index 7a2d1e7..2e3b4f7 100644 > --- a/drivers/usb/gadget/s3c_udc_otg.c > +++ b/drivers/usb/gadget/s3c_udc_otg.c > @@ -414,7 +414,11 @@ static void reconfig_usbd(struct s3c_udc *dev) > |0<<7 /* Ulpi DDR sel*/ > |0<<6 /* 0: high speed utmi+, 1: full > speed serial*/ |0<<4 /* 0: utmi+, 1:ulpi*/ > +#ifdef CONFIG_USB_GADGET_PHY_8_BIT > + |0<<3 /* phy i/f 0:8bit, 1:16bit*/ > +#else > |1<<3 /* phy i/f 0:8bit, 1:16bit*/ > +#endif
Is your board using also host phy? As fair as I remember, the upper 8 bits are for host interface. > |0x7<<0; /* HS/FS Timeout**/ > > if (dev->pdata->usb_gusbcfg) Despite my above question: Acked-by: Lukasz Majewski <[email protected]> -- Best regards, Lukasz Majewski Samsung R&D Institute Poland (SRPOL) | Linux Platform Group _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
