Hi Steve, > From: "JD (Jiandong) Zheng" <[email protected]> > > Signed-off-by: Steve Rae <[email protected]> > --- > > Changes in v2: > - rebased against u-boot-dfu > > board/broadcom/bcm28155_ap/bcm28155_ap.c | 40 > ++++++++++++++++++++++++++++++++ > drivers/usb/gadget/Makefile | 1 + > include/configs/bcm28155_ap.h | 21 +++++++++++++++++ 3 > files changed, 62 insertions(+) > > diff --git a/board/broadcom/bcm28155_ap/bcm28155_ap.c > b/board/broadcom/bcm28155_ap/bcm28155_ap.c index 940a1c2..20eb191 > 100644 --- a/board/broadcom/bcm28155_ap/bcm28155_ap.c > +++ b/board/broadcom/bcm28155_ap/bcm28155_ap.c > @@ -12,12 +12,20 @@ > #include <asm/kona-common/clk.h> > #include <asm/arch/sysmap.h> > > +#include <usb.h> > +#include <usb/s3c_udc.h> > +#include <g_dnl.h> > + > #define SECWATCHDOG_SDOGCR_OFFSET 0x00000000 > #define SECWATCHDOG_SDOGCR_EN_SHIFT 27 > #define SECWATCHDOG_SDOGCR_SRSTEN_SHIFT 26 > #define SECWATCHDOG_SDOGCR_CLKS_SHIFT 20 > #define SECWATCHDOG_SDOGCR_LD_SHIFT 0 > > +#ifndef CONFIG_USB_SERIALNO > +#define CONFIG_USB_SERIALNO "1234567890" > +#endif > + > DECLARE_GLOBAL_DATA_PTR; > > /* > @@ -85,3 +93,35 @@ int board_mmc_init(bd_t *bis) > return ret; > } > #endif > + > +#ifdef CONFIG_USB_GADGET > +static struct s3c_plat_otg_data bcm_otg_data = { > + .regs_otg = HSOTG_BASE_ADDR > +}; > + > +int board_usb_init(int index, enum usb_init_type init) > +{ > + debug("%s: performing s3c_udc_probe\n", __func__); > + return s3c_udc_probe(&bcm_otg_data); > +} > + > +int g_dnl_bind_fixup(struct usb_device_descriptor *dev, const char > *name) +{ > + debug("%s\n", __func__); > + if (!getenv("serial#")) > + g_dnl_set_serialnumber(CONFIG_USB_SERIALNO); > + return 0; > +} > + > +int g_dnl_get_board_bcd_device_number(int gcnum) > +{ > + debug("%s\n", __func__); > + return 1; > +} > + > +int board_usb_cleanup(int index, enum usb_init_type init) > +{ > + debug("%s\n", __func__); > + return 0; > +} > +#endif > diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile > index 4e15323..4c11a7e 100644 > --- a/drivers/usb/gadget/Makefile > +++ b/drivers/usb/gadget/Makefile > @@ -11,6 +11,7 @@ obj-$(CONFIG_USB_ETHER) += epautoconf.o config.o > usbstring.o # new USB gadget layer dependencies > ifdef CONFIG_USB_GADGET > obj-$(CONFIG_USB_GADGET_ATMEL_USBA) += atmel_usba_udc.o > +obj-$(CONFIG_USB_GADGET_BCM_UDC_OTG_PHY) += bcm_udc_otg_phy.o > obj-$(CONFIG_USB_GADGET_S3C_UDC_OTG) += s3c_udc_otg.o > obj-$(CONFIG_USB_GADGET_S3C_UDC_OTG_PHY) += s3c_udc_otg_phy.o > obj-$(CONFIG_USB_GADGET_FOTG210) += fotg210.o > diff --git a/include/configs/bcm28155_ap.h > b/include/configs/bcm28155_ap.h index 900dc42..46920a1 100644 > --- a/include/configs/bcm28155_ap.h > +++ b/include/configs/bcm28155_ap.h > @@ -109,6 +109,7 @@ > * for example. > */ > #define CONFIG_DOS_PARTITION > +#define CONFIG_EFI_PARTITION > > /* version string, parser, etc */ > #define CONFIG_VERSION_VARIABLE > @@ -136,4 +137,24 @@ > > #undef CONFIG_CMD_NFS > > +/* Fastboot and USB OTG */ > +#define CONFIG_USB_FUNCTION_FASTBOOT > +#define CONFIG_CMD_FASTBOOT > +#define CONFIG_FASTBOOT_FLASH > +#define CONFIG_FASTBOOT_FLASH_MMC_DEV 0 > +#define CONFIG_SYS_CACHELINE_SIZE 64 > +#define CONFIG_USB_FASTBOOT_BUF_SIZE (CONFIG_SYS_SDRAM_SIZE - > (1024 * 1024)) +#define CONFIG_USB_FASTBOOT_BUF_ADDR ^^^^^^^^^^^ Here you can use SZ_1M
> CONFIG_SYS_SDRAM_BASE +#define CONFIG_USB_GADGET > +#define CONFIG_USB_GADGET_DUALSPEED > +#define CONFIG_USB_GADGET_VBUS_DRAW 0 > +#define CONFIG_USB_GADGET_S3C_UDC_OTG > +#define CONFIG_USB_GADGET_BCM_UDC_OTG_PHY > +#define CONFIG_USB_GADGET_PHY_8_BIT > +#define CONFIG_USB_GADGET_DOWNLOAD > +#define CONFIG_USBID_ADDR 0x34052c46 > +#define CONFIG_G_DNL_VENDOR_NUM 0x18d1 /* > google */ +#define CONFIG_G_DNL_PRODUCT_NUM 0x0d02 /* > nexus one */ +#define CONFIG_G_DNL_MANUFACTURER "Broadcom > Corporation" + > #endif /* __BCM28155_AP_H */ -- Best regards, Lukasz Majewski Samsung R&D Institute Poland (SRPOL) | Linux Platform Group _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
