On 15-07-07 06:27 AM, Lukasz Majewski wrote:
Hi Steve,
Signed-off-by: Steve Rae <[email protected]>
---
Changes in v2: None
drivers/usb/gadget/s3c_udc_otg.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/usb/gadget/s3c_udc_otg.c
b/drivers/usb/gadget/s3c_udc_otg.c index 7a2d1e7..2e3b4f7 100644
--- a/drivers/usb/gadget/s3c_udc_otg.c
+++ b/drivers/usb/gadget/s3c_udc_otg.c
@@ -414,7 +414,11 @@ static void reconfig_usbd(struct s3c_udc *dev)
|0<<7 /* Ulpi DDR sel*/
|0<<6 /* 0: high speed utmi+, 1: full
speed serial*/ |0<<4 /* 0: utmi+, 1:ulpi*/
+#ifdef CONFIG_USB_GADGET_PHY_8_BIT
+ |0<<3 /* phy i/f 0:8bit, 1:16bit*/
+#else
|1<<3 /* phy i/f 0:8bit, 1:16bit*/
+#endif
Is your board using also host phy? As fair as I remember, the upper 8
bits are for host interface.
Hi Lukasz,
Are you suggesting that we define this as a 16-bit interface, and then
only use the upper 8-bits (to achieve the 8-bit interface)?
Please clarify, Thanks Steve
|0x7<<0; /* HS/FS Timeout**/
if (dev->pdata->usb_gusbcfg)
Despite my above question:
Acked-by: Lukasz Majewski <[email protected]>
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot
