On 01/24/2017 11:05 AM, Dalon Westergreen wrote: > From: Dalon Westergreen <[email protected]> > > Move repeated environment settings for socfpga boards > to a common header. > > The default values for the boot partition and the > OS filesystem partition have changed and as > as result the default uboot environment for socfpga > boards needs updating. > > Move to using CONFIG_DEFAULT_DEVICE_TREE for setting the > default linux devicetree used during linux boot. > > Signed-off-by: Dalon Westergreen <[email protected]> > --- > include/configs/socfpga_common.h | 27 +++++++++++++++++++++++++++ > 1 file changed, 27 insertions(+) > > diff --git a/include/configs/socfpga_common.h > b/include/configs/socfpga_common.h > index 6285266..bdd6e2f 100644 > --- a/include/configs/socfpga_common.h > +++ b/include/configs/socfpga_common.h > @@ -336,5 +336,32 @@ unsigned int cm_get_qspi_controller_clk_hz(void); > * Stack setup > */ > #define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR > + > +/* Extra Environment */ > +#ifndef CONFIG_EXTRA_ENV_SETTINGS > +#define CONFIG_EXTRA_ENV_SETTINGS \ > + "verify=n\0" \ > + "loadaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ > + "bootimage=" CONFIG_BOOTFILE "\0" \ > + "fdt_addr=100\0" \ > + "fdtimage=" CONFIG_DEFAULT_FDT_FILE "\0" \ > + "ramboot=setenv bootargs " CONFIG_BOOTARGS ";" \ > + "bootm ${loadaddr} - ${fdt_addr}\0" \ > + "mmcroot=/dev/mmcblk0p3\0" \
Should this be mmcblk0p2? Dinh _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
