On 01/24/2017 09:35 PM, Westergreen, Dalon wrote: > On Tue, 2017-01-24 at 21:31 -0600, Dinh Nguyen wrote: >> >> On 01/24/2017 11:05 AM, Dalon Westergreen wrote: >>> >>> From: Dalon Westergreen <[email protected]> >>> >>> Move repeated environment settings for socfpga boards >>> to a common header. >>> >>> The default values for the boot partition and the >>> OS filesystem partition have changed and as >>> as result the default uboot environment for socfpga >>> boards needs updating. >>> >>> Move to using CONFIG_DEFAULT_DEVICE_TREE for setting the >>> default linux devicetree used during linux boot. >>> >>> Signed-off-by: Dalon Westergreen <[email protected]> >>> --- >>> include/configs/socfpga_common.h | 27 +++++++++++++++++++++++++++ >>> 1 file changed, 27 insertions(+) >>> >>> diff --git a/include/configs/socfpga_common.h >>> b/include/configs/socfpga_common.h >>> index 6285266..bdd6e2f 100644 >>> --- a/include/configs/socfpga_common.h >>> +++ b/include/configs/socfpga_common.h >>> @@ -336,5 +336,32 @@ unsigned int cm_get_qspi_controller_clk_hz(void); >>> * Stack setup >>> */ >>> #define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR >>> + >>> +/* Extra Environment */ >>> +#ifndef CONFIG_EXTRA_ENV_SETTINGS >>> +#define CONFIG_EXTRA_ENV_SETTINGS \ >>> + "verify=n\0" \ >>> + "loadaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ >>> + "bootimage=" CONFIG_BOOTFILE "\0" \ >>> + "fdt_addr=100\0" \ >>> + "fdtimage=" CONFIG_DEFAULT_FDT_FILE "\0" \ >>> + "ramboot=setenv bootargs " CONFIG_BOOTARGS ";" \ >>> + "bootm ${loadaddr} - ${fdt_addr}\0" \ >>> + "mmcroot=/dev/mmcblk0p3\0" \ >> >> Should this be mmcblk0p2? > that was the point of the patches, p1 is now the > a2 partition, so the fat and root partition > shifted up by 1. >
Ok, sorry about that. Dinh _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
