On Tue, 2017-01-24 at 21:31 -0600, Dinh Nguyen wrote: > > On 01/24/2017 11:05 AM, Dalon Westergreen wrote: > > > > From: Dalon Westergreen <[email protected]> > > > > Move repeated environment settings for socfpga boards > > to a common header. > > > > The default values for the boot partition and the > > OS filesystem partition have changed and as > > as result the default uboot environment for socfpga > > boards needs updating. > > > > Move to using CONFIG_DEFAULT_DEVICE_TREE for setting the > > default linux devicetree used during linux boot. > > > > Signed-off-by: Dalon Westergreen <[email protected]> > > --- > > include/configs/socfpga_common.h | 27 +++++++++++++++++++++++++++ > > 1 file changed, 27 insertions(+) > > > > diff --git a/include/configs/socfpga_common.h > > b/include/configs/socfpga_common.h > > index 6285266..bdd6e2f 100644 > > --- a/include/configs/socfpga_common.h > > +++ b/include/configs/socfpga_common.h > > @@ -336,5 +336,32 @@ unsigned int cm_get_qspi_controller_clk_hz(void); > > * Stack setup > > */ > > #define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR > > + > > +/* Extra Environment */ > > +#ifndef CONFIG_EXTRA_ENV_SETTINGS > > +#define CONFIG_EXTRA_ENV_SETTINGS \ > > + "verify=n\0" \ > > + "loadaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ > > + "bootimage=" CONFIG_BOOTFILE "\0" \ > > + "fdt_addr=100\0" \ > > + "fdtimage=" CONFIG_DEFAULT_FDT_FILE "\0" \ > > + "ramboot=setenv bootargs " CONFIG_BOOTARGS ";" \ > > + "bootm ${loadaddr} - ${fdt_addr}\0" \ > > + "mmcroot=/dev/mmcblk0p3\0" \ > > Should this be mmcblk0p2? that was the point of the patches, p1 is now the a2 partition, so the fat and root partition shifted up by 1.
> > Dinh -- ------------------------------------------ Dalon Westergreen Embedded Specialist Intel Programmable Solutions Group Phone : 1.858.202.3518 ------------------------------------------ _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
