We do not use print_cpuinfo and clock command code in SPL, disable it when building SPL image.
Signed-off-by: Anatolij Gustschin <[email protected]> --- arch/arm/mach-imx/cpu.c | 4 ++-- arch/arm/mach-imx/mx6/clock.c | 30 ++++++++++++++++-------------- 2 files changed, 18 insertions(+), 16 deletions(-) diff --git a/arch/arm/mach-imx/cpu.c b/arch/arm/mach-imx/cpu.c index 1017eb8..18205dc 100644 --- a/arch/arm/mach-imx/cpu.c +++ b/arch/arm/mach-imx/cpu.c @@ -25,7 +25,7 @@ #include <fsl_esdhc.h> #endif -#if defined(CONFIG_DISPLAY_CPUINFO) +#if defined(CONFIG_DISPLAY_CPUINFO) && !defined(CONFIG_SPL_BUILD) static u32 reset_cause = -1; static char *get_reset_cause(void) @@ -132,7 +132,7 @@ unsigned imx_ddr_size(void) } #endif -#if defined(CONFIG_DISPLAY_CPUINFO) +#if defined(CONFIG_DISPLAY_CPUINFO) && !defined(CONFIG_SPL_BUILD) const char *get_imx_type(u32 imxtype) { diff --git a/arch/arm/mach-imx/mx6/clock.c b/arch/arm/mach-imx/mx6/clock.c index 0e019c4..71a9e6b 100644 --- a/arch/arm/mach-imx/mx6/clock.c +++ b/arch/arm/mach-imx/mx6/clock.c @@ -1220,6 +1220,20 @@ void enable_thermal_clk(void) enable_pll3(); } +#ifdef CONFIG_MTD_NOR_FLASH +void enable_eim_clk(unsigned char enable) +{ + u32 reg; + + reg = __raw_readl(&imx_ccm->CCGR6); + if (enable) + reg |= MXC_CCM_CCGR6_EMI_SLOW_MASK; + else + reg &= ~MXC_CCM_CCGR6_EMI_SLOW_MASK; + __raw_writel(reg, &imx_ccm->CCGR6); +} +#endif + unsigned int mxc_get_clock(enum mxc_clock clk) { switch (clk) { @@ -1262,6 +1276,7 @@ unsigned int mxc_get_clock(enum mxc_clock clk) return 0; } +#ifndef CONFIG_SPL_BUILD /* * Dump some core clockes. */ @@ -1463,20 +1478,6 @@ void select_ldb_di_clock_source(enum ldb_di_clock clk) } #endif -#ifdef CONFIG_MTD_NOR_FLASH -void enable_eim_clk(unsigned char enable) -{ - u32 reg; - - reg = __raw_readl(&imx_ccm->CCGR6); - if (enable) - reg |= MXC_CCM_CCGR6_EMI_SLOW_MASK; - else - reg &= ~MXC_CCM_CCGR6_EMI_SLOW_MASK; - __raw_writel(reg, &imx_ccm->CCGR6); -} -#endif - /***************************************************/ U_BOOT_CMD( @@ -1484,3 +1485,4 @@ U_BOOT_CMD( "display clocks", "" ); +#endif -- 2.7.4 _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
