Dear Felix Radensky, In message <[email protected]> you wrote: > > I'm running latest u-boot on 1GHz Canyonlands board and have trouble > using 64-bit transparent PCI-PCI PLX 6254 bridge. With PLX evaluation > board plugged into Canyonlands PCI slot u-boot hangs. With PCI support -----------------------------------------^^^^^^^^^^^^^
Where exactly does U-Boot hang? What are the console messages you see? And which U-Boot version is this, and which version of the Canyonlands board? > disabled u-boot works fine. The PLX board is OK, it was recognized by > both u-boot and kernel on Freescale MPC8536DS board. On Canyonlands > linux-2.6.32 silently resets the board when PLX is plugged in. Any ideas --^^^^^^^^^^^^^^^^^^^^^^^^^^^^ This is inconsistent: above you report U-Boot hangs, here you claim that Linux reboots? > U-Boot 2009.11-rc2-00002-g386118a (Dec 09 2009 - 18:48:44) > > CPU: AMCC PowerPC 460EX Rev. A at 1000 MHz (PLB=200 OPB=100 EBC=100) --------------------------------------^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Did you try running in another configuration, like 800-nor or 1066-nor? Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [email protected] If I ever needed a brain transplant, I'd choose a teenager's because I'd want a brain that had never been used. _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot

