Hello,

I've encountered the same problem and found a solution.
In 
drivers/pci/pci_indirect.c, add the following code block at line 79:

#elif 
defined(CONFIG_460EX)
#define INDIRECT_PCI_OP(rw, size, type, op, mask)                        \

static int                                                               \
indirect_##rw##_config_##size(struct pci_controller *hose,      
         \
                              pci_dev_t dev, int offset, type val)       \
{                                                                        \
        u32 b, d,f;             
                                         \
        b = PCI_BUS(dev); d = PCI_DEV(dev); f = PCI_FUNC(dev);           \
        b = b - 
hose->first_busno;                                       \
        dev = PCI_BDF(b, d, f);                                          \
        if (PCI_BUS(dev) > 
0)                                            \
                out_le32(hose->cfg_addr, dev 
| (offset & 0xfc) | 0x00000001); \
        
else                                                             \
                out_le32
(hose->cfg_addr, dev | (offset & 0xfc) | 0x00000000); \
        cfg_##rw(val, hose-
>cfg_data + (offset & mask), type, op);  \
        return 0;                                                        \
}
#else

Hope 
this helps

Ciao

Max Tretene, ACube Systems Srl
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to