Hi, Wolfgang Felix Radensky wrote: > Hi, Wolfgang > > > >> --------------------------------------^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ >> >> Did you try running in another configuration, like 800-nor or >> 1066-nor? >> >> >> > I did try 600-nor and 800-nor, but that didn't change anything. With > 1066-nor > u-boot hangs earlier, the console messages show > > U-Boot 2009.11-rc2-00002-g386118a (Dec 09 2009 - 18:48:44) > > CPU: AMCC PowerPC 460EX Rev. A at 1066.667 MHz (PLB=266 OPB=88 EBC=88) > Security/Kasumi support > Bootstrap Option H - Boot ROM Location I2C (Addr 0x52) > Internal PCI arbiter enabled > 32 kB I-Cache 32 kB D-Cache > Board: Canyonlands - AMCC PPC460EX Evaluation Board, 2*PCIe, Rev. 14 > I2C: ready > DRAM: 512 MB (ECC not enabled, 533 MHz, CL4) > > Felix. > >
Actually, 1066-nor is not different from other configurations. Switching to 1066-nor requires power-cycle, it's not enough to simply run "reset" command. Anyway, in this configuration u-boot also hangs when PLX board is plugged in. Felix. _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot

