Rename CONFIG_SPL_RESET_SUPPORT to CONFIG_SPL_DM_RESET, so can use
CONFIG_IS_ENABLED(DM_RESET) checking in reset.h later.
Signed-off-by: Ley Foon Tan <ley.foon....@intel.com>
---
arch/arm/mach-stm32mp/Kconfig | 2 +-
common/spl/Kconfig | 2 +-
drivers/Makefile | 2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/mach-stm32mp/Kconfig b/arch/arm/mach-stm32mp/Kconfig
index abceede..898ad6b 100644
--- a/arch/arm/mach-stm32mp/Kconfig
+++ b/arch/arm/mach-stm32mp/Kconfig
@@ -13,7 +13,7 @@ config SPL
select SPL_OF_TRANSLATE
select SPL_PINCTRL
select SPL_REGMAP
- select SPL_RESET_SUPPORT
+ select SPL_DM_RESET
select SPL_SERIAL_SUPPORT
select SPL_SYSCON
select SPL_DRIVERS_MISC_SUPPORT
diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index 431710a..bf301a9 100644
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -577,7 +577,7 @@ config SPL_POST_MEM_SUPPORT
performed before booting. This enables the drivers in post/drivers
as part of an SPL build.
-config SPL_RESET_SUPPORT
+config SPL_DM_RESET
bool "Support reset drivers"
depends on SPL
help
diff --git a/drivers/Makefile b/drivers/Makefile
index b3f1b60..a4713eb 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -28,7 +28,7 @@ obj-$(CONFIG_ARMADA_XP) += ddr/marvell/axp/
obj-$(CONFIG_ALTERA_SDRAM) += ddr/altera/
obj-$(CONFIG_SPL_POWER_SUPPORT) += power/ power/pmic/
obj-$(CONFIG_SPL_POWER_SUPPORT) += power/regulator/
-obj-$(CONFIG_SPL_RESET_SUPPORT) += reset/
+obj-$(CONFIG_SPL_DM_RESET) += reset/
obj-$(CONFIG_SPL_MTD_SUPPORT) += mtd/
obj-$(CONFIG_SPL_ONENAND_SUPPORT) += mtd/onenand/
obj-$(CONFIG_SPL_UBI) += mtd/ubispl/
--
2.2.2
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
